|
Udylite Cyclemaster plating line set up for plating on plastic. The line was set up to be in 2 halves, with a shuttle to move the racks in between them. The tanks on one half are all new, and the other half was an old line that as reworked. The linings were all redone, but the machine itself is old. There are no carriers, and the chassis and super structure is rough at best. About 50% of the rail is there, and most of the anode bars for the nickel and chrome, but not the acid copper. There are no rectifiers, filters or bus bar, but there is a cosmos evaporator bought new and never used for the chrome etch. The tank size is 60" deep, 22"dot, and 33" front to back.
- 60 racks per hour on a 2 minute cycle
- Don’t have a S# but here is a drawing number - #D-F00347, 1959
- Single station rinse tank is 27” CDOT x 25” DOT x 72” Deep.
FOB Cleveland, OH
|
