The BX1200 provides a maximum flow rate of 1200 gallons (4500 liters) per hour. Use it stationary on one tank or move it from tank to tank. Body length of 4”. The BX1200 comes complete, preassembled and ready to operate.

BX1200 Specifications
Pump: All-CPVC or polypropylene construction with Teflon-covered stainless steel shaft.

Flow Rate: 1200 gallons (4500 liters) per hour at 60 Hz. A flow-rate reduction of about 18% is typical when operating at 50 Hz.

Pressure: 12 feet (3.6 meters) of head pressure.

Weight: About 10 pounds (4.5 kg), depending on pump body length

Motor: Epoxy coated, 1/12th hp (60 watt), single phase, 3000 RPM, TEFC, thermally protected. When ordering, specify one of the following three motors:
(1) 115 volt, 60 Hz, 2.6 A
(2) 115 volt, 50/60 Hz, 2.0 A, or
(3) 230 volt, 50/60 Hz, 1.3 A

Important: To ensure priming and proper operation, solution must always be above Weep Hole on pump body. Confirm length of pump body when ordering.