Flo King BX L2500 14 Filter Pump
The BXL2500 is designed for tanks where overhead clearance is a problem. The motor is inverted and positioned outside the tank, taking up only 2" (5 cm) of space above the tank. The unit provides a maximum flow rate of 2500 gallons (9500 liters) per hour. Use it stationary on one tank or move it from tank to tank. This model has a body length 8".

The BXL2500 comes complete, preassembled, ready to operate and includes the items shown in the labeled photo (right). For best results in most metal finishing solutions, use the BXL2500 with our Permacore Magnum (PMCA) reusable or FK50

Poly-Spun Disposable filter cartridges in the appropriate length.

BXL2500 Specifications
Pump: All-CPVC or polypropylene construction with Teflon-covered stainless steel shaft. Pump also available, on special-order basis, in PVDF (Kynar) or stainless steel.
Flow Rate: 2500 gallons (9500 liters) per hour at 60 Hz. A flow-rate reduction of about 18% is typical when operating at 50 Hz.
Pressure: 27 feet (8.2 meters) of head pressure.
Weight: About 25 pounds (11 kg), depending on pump body length
Motor: Epoxy coated, TEFC, Thermally Protected. Available in single phase, 1/3 HP (250 watt), 120/240 V, 6.0/3.0 A, 50/60 HZ, 2850/3450 RPM. 
Important: To ensure priming and proper operation, solution should be 3" (8 cm) or more above Weep Hole on pump body. Specify length of pump body when ordering. Also, with standard BXL2500, width of tank lip or flange must be less than 3-1/2" (9 cm) due to fixed space between pump body and motor. Optional Long Motor Base accommodates tank mounting surfaces up to 6-1/2" (16 cm) wide.