PRICE REDUCED - NOW CONSIDERING ALL OFFERS!

Electrolytic Recovery Line with 26 square feet of Cathode Surface Area, including two 500 amp, 12volt, 440/3ph Rapid Rectifiers.  Footprint of 24” x 20” x 30”H.

This system was designed for recovering or removing metal content from large volumes of solutions that contain either heavy or precious metals dissolved within them.  Electrolytic Recovery is the first line of attack.  Pure recovery power in an elegantly simple design.

Process Description:  As the metal bearing stream enters the cell containing pairs of anodes sandwiching cathodes and the turbulence created at the cathode interface insures high plating efficiency and translates into fast plate-out to very low concentrations. The system is designed for easy access to all electrodes.

Application:  Ideal for removal of metals from copper sulfate, copper cyanide, cadmium cyanide, gold cyanide (stripper solutions), various nickel solutions, palladium, palladium nickel, silver cyanide, zinc cyanide…etc.

Benefits: As waste disposal costs rise due to limited landfill sites, administrative costs, transportation costs, etc. Any metal that can be electrolytic ally removed as opposed to precipitated as sludge, immediately turns a liability into an asset. The metal-laden electrodes are saleable as scrap metal. Alsoimportant is the reduced possible future liability associated with shipping to a landfill.

Conclusion:  Wherever possible, the first line of attack should be electrolysis. Even if electrolysis can not completely solve the problem, any reduction of sludge attained through electrolysis will mean a large cost saving.

Specifications:

Power Requirements: 440 V. AC 3 Phase

Maximum Output Current: 500 AMPS. DC

Maximum Output Voltage: 12 V.

Total Cathode Surface Area: Approx. 26 ft2

Dimensions: 24" x 20" x 30" H

This System Includes Two Rapid Rectifiers

FOB: RI