PREMIUM ELECTROPLATING C-155 SERIES
CARBON FILTER CARTRIDGES 30in. long x 2 5/8 in. O/D Diameter, Priced per case / 30 per case

The C-155 Series Activated Carbon Cartridges are a premium performing line specifically designed for electroplating solutions. They represent the best technology available to us along with over nine years manufacturing experience with electroplating filter cartridges. The C-155 Series is characterized in appearance by a distinctive gold colored outer netting,contains no cellulose and can be considered as sulfur-free. This series is the ideal choice for either continuous or batch treating acid copper sulfate solutions in particular but also are the uncompromising choice when one cartridge type is desired for all applications.

Features

1. Eliminate the past requirement for filter aids and filtration after carbon treating.

2. Pre-washed to further guarantee no carbon bleed-off.

3. 7.5 micron nominal retention with enormous sediment holding capacity in a true depth-type, 2 phase fibrous structure.

4. Resistant without breakdown in both strongly acid and strongly alkaline solutions up to 180? F.

5. Contain no cellulose or other products that could contribute to plating porosity or brittleness.

6. Each nominal 10” length contains approximately 4 oz. of sulfur-free, highly purified vegetable base carbon and may be used at up to 3 gpm flow for continuous treating. 1.5 gpm is acceptable for batch treating.

Construction Details
Inner polypropylene core for compressive strength.

Inner layer of polyolefin and synthetic fibers selected for a nominal 7.5 micron final filter.

This performs a final scrubbing job assuring no carbon bleed-off.
Outer pre-filter-purification layer consisting of a blend of finely pulverized activated carbon

which has been locked on to a blend of polyolefin and synthetic fibers in a unique wet

accretion process. This layer provides for true depth filtration-purification in one solution pass without carbon channeling or media migration.

Outer polyolefin netting for surface integrity and appearance.
Injection molded polyethylene base end-caps of low durometer provide for effective sealing when cartridges are used alone or when stacked